Professional Wheelchair & Mobility Aids Manufacturer | Feiyang Medical Phone: +86-13809226584 E-mail: fymed@vip.163.com
loading
| Availability: | |
|---|---|
| Quantity: | |
FY993LF1
Feiyang Medical
A four-tip walker has to be lifted and placed with every step. The FY993LF1 rolls on two 5-inch front wheels, so the user pushes it forward instead of lifting it, and the seat at 49.5-59.5 cm lets them rest without finding a chair. That combination is what makes it usable for a full lap of a care-home corridor rather than a few
Four measurements decide whether this walker works in a room: total width 60 cm at the armrests, total length 52.5 cm, folded width 21 cm, and seat height 49.5-59.5 cm. Measure the narrowest doorway on the route and the space in front of the toilet before ordering.
· Total width (armrest to armrest) 60 cm · total length 52.5 cm
· Folded width 21 cm
· Seat width 36.5 cm · seat depth 27 cm
· Seat height 49.5-59.5 cm · handle height 79-89 cm, 5 positions
The frame is aluminum and weighs 3.2 kg net. Weight capacity is 100 kg. The seat is PVC over a padded base, the armrests are PVC, and both wipe clean — which is why care homes specify this type for shared use. Carton weight and packing size are listed in the parameter table below.
Two 5-inch wheels sit at the front. This is a two-wheel walker, not a rollator: there are no hand brakes, so it is slowed by the user's weight and grip, not by a brake lever. It is meant to be pushed forward at walking pace on flat ground and lifted over kerbs and thresholds rather than rolled over them.
FY993LF1 carries CE marking as a medical device and is listed with the U.S. FDA as a Class I walking aid (establishment registration plus device listing). It is produced in a factory whose quality management system is certified to ISO 13485 for medical devices and ISO 9001. Certificate copies — CE certificate, FDA registration and listing confirmations, and both ISO certificates — are available with the quotation.
Constructed with an aluminum frame, this walker offers excellent strength-to-weight ratio. The aluminum is corrosion-resistant, ensuring durability and long service life. The PVC armrests and seat provide a comfortable grip and seating option. They are easy to clean and maintain, enhancing the overall user experience.
The 5-inch front wheels are a key feature. They enable smooth and stable movement on various terrains, be it indoor floors or outdoor paths. The wheels' size and quality reduce the effort required to push the walker, allowing users to maneuver with ease and confidence, enhancing mobility and independence.
With a weight capacity of 100kg, it can accommodate a wide range of users. This high capacity provides a reliable support system, giving users the assurance that the walker can handle their weight. It is suitable for different body types and conditions, making it a versatile choice for those in need of walking assistance.
The product's size in folded state is highly advantageous. With a folded width of just 21CM, it can be stored in tight spaces such as closets or car trunks. Its compactness makes it convenient for travel and storage. The lightweight nature of 3.2KG further adds to its portability, allowing users to take it wherever they go.
| Total Length | 52.5cm |
| Total Width | 60cm |
| Total Height | 79-89cm |
| Seat Height | 49.5-59.5cm |
| Seat width | 36.5cm |
| Seat Depth | 27cm |
| Armrest width | 45cm |
| Backrest height | 22cm |
| Armrest height above seat | 29.5cm |
| Folded Width | 21cm |
| Weight capacity | 100kg |
| N.W | 3.2KG |
| G.W | 8.3KG |
| Packing Size | 62*30*93cm,2pcs/ctn |
Ideal for elderly people or those with limited mobility in daily indoor activities. They can use it to move around the house, such as going from the bedroom to the living room, kitchen, or bathroom. It provides stable support and reduces the risk of falls, allowing them to perform routine tasks with more confidence and independence.
Suitable for short walks in the neighborhood, park, or sidewalk. The 5-inch front wheels and lightweight design make it easy to navigate on relatively flat outdoor surfaces. Users can enjoy fresh air and a bit of exercise while relying on the walker for balance and support, enhancing their overall well-being and quality of life.
For patients recovering from leg surgeries or injuries, this walker is a great aid. It helps them gradually regain their walking ability and strength. The adjustable features can be customized according to the patient's height and specific needs during the recovery process, promoting a safer and more effective rehabilitation.
In hospitals, clinics, or rehabilitation centers, patients can use this walker to move between different departments or treatment areas. It offers a convenient and stable means of transportation within the medical facility, enabling patients to attend appointments and therapies more easily and independently.
A1: We are a manufacturer. Foshan Feiyang Medical has produced walking aids, wheelchairs and bath safety products for over 15 years, and this walker is made on our own line.
A2: No. There are no hand brakes on this model. It is a two-wheel walker: the front wheels roll and the rear legs are fixed, so it is held steady by the user's weight rather than by a brake. It must not be used on slopes, stairs or wet ramps.
FY993LF1 rolls on two 5-inch front wheels and adds a backrest and armrests. FY961L stands on four rubber tips with no wheels and no backrest. Choose FY993LF1 for long corridors and flat outdoor paths; choose FY961L for an indoor walker that must not roll.
A4:The seat sits 49.5-59.5 cm above the floor and the handles adjust from 79 cm to 89 cm in five positions. Give us the user's height and we will confirm the setting.
A5:Net weight 3.2 kg; weight capacity 100 kg. Carton gross weight is 8.3 kg for 2 pcs.
A6:FY993LF1 carries CE marking and is listed with the U.S. FDA as a Class I walking aid. The factory's quality management system is certified to ISO 13485 and ISO 9001. Certificate copies are sent with the quotation.
